1. True Bypass on both sides
   
2. Two 3PDT stomp switches, one for each side. Either or both can be used.
   
3. Status LED on each side.
   
4. NOS NKT-275 Germanium transistors, selected for best tone and low noise on both effects.
   
5. High quality RE’AN British input and output jacks
   
6. Battery disconnected when INPUT cord removed (input is on the right).
   
7. ON/OFF battery switch integrated into FUZZ knob, so you don't have to unplug pedal if it’s in a pedalboard.
   
8. No Power jack as these are detrimental to the ultimate tones, and dangerous due to positive ground.
   
9. Battery should be a cheap non-alkaline general purpose battery, as found in the dollar stores. These will sound better than an alkaline.
   
10. Size is 4.75" wide, 3.75" long, and 1.5" tall not including switch etc (about 2 1/8" tall to the switch).

This effect should not have any non-true bypass effects in front of it. Otherwise, the fuzz’s cleanup function will not work well.