Home > Other Effects Manufacturers A-L > Foxrox >

Foxrox Wah Retrofit FET buffer/amp circuit Mod
Foxrox Wah Retrofit


 
Our Price: $55.00


Availability - time to dispatch:: Usually Ships in 1 to 2 Business Days
Product Code: FOXROX WAH RETROFIT

Description
 
Analog Man carries the Foxrox Wah Retrofit. The Foxrox Wah Retrofit is a self-contained FET buffer/amp circuit that gets installed into your Wah Wah pedal, giving it the ability to cut through any Fuzz Face or Fuzz Face clone.
Features

Did you ever notice that your Wah Wah pedal doesn't cut it when plugged into some effects, such as the Dallas Arbiter Fuzz Face, or Fuzz Face clone? This is something that has annoyed guitarists since the late 60's. But now there's a remedy - You can get FULL RANGE out of your Wah Wah pedal with the Foxrox Wah Retrofit. If this sounds interesting to you - READ ON!

Foxrox Electronics is proud to offer the ideal remedy to this problem. The Foxrox Wah Retrofit is a self-contained FET buffer/amp circuit that gets installed into your Wah Wah pedal, giving it the ability to cut through any Fuzz Face or Fuzz Face clone. By essentially installing a "real" output section, the Wah Wah pedal becomes immune to the effects of loading, restoring range and depth to older, vintage Wah wah pedals without affecting their vintage value. Newer, high-end "boutique" wah pedals, such as Teese RMC pedals also benefit from this mod because they are based on the same, classic inductor-based circuit. Since it is a basic FET audio buffer/amplifier, this circuit can also be added to effects pedals that need more output, as well as effects that need more drive at the input. NOTE: A Teese RMC wah with the Foxrox Wah Retrofit, going into a Captain Coconut (1 or 2) is guaranteed to deliver the best wah/fuzz/vibe/octave sounds you've ever heard!

Features:

  • Connection wires: RED = +9 Volts, DC; BLACK = Ground; Orange = Input; PURPLE = Output
  • Volume: Trimmer offers continuous volume control with some available extra gain (around 3 dB). Some of the best Wah Wha pedals out there have an inherent boost that (without this mod) can't be attenuated without affecting the sound of the Wah. The Foxrox Wah Retrofit makes it possible to add or cut the level without affecting the Wah pedal's natural tone. The FWR can also be built to give up to 15 dB of gain, available upon request. However this is not recommended for wah wah pedals because of possible distortion during resonant peaks.

Foxrox Wah Retrofit with installation - You send in your Wah Wah pedal and the Foxrox Wah Retrofit is professionally installed and tested. Price: $85.00 + $10.00 return shipping & handling (total $95.00) Price applies only to Wah wah pedals that are in full working condition. Other repairs can incur an additional charge and are performed only upon approval from owner. We will install TRUE BYPASS for an additional $15 for the switch and $20 for labor, this is a special price for the true bypass mod.

More information: Contact [email protected]

READ ALL ABOUT IT!


Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Other Effects Manufacturers A-L > Foxrox
Accessories
Other Effects Manufacturers A-L