Home > Other Effects Manufacturers A-L > Black Cat >

Black Cat D&S Pedal
Black Cat D&S Pedal
Black Cat D&S Pedal
  
Our Price: $175.00



Availability - time to dispatch:: Usually Ships in 1 to 2 Business Days
Product Code: BC-DS

Power Cables for your existing multi-power supply

18" Power Cable for PP2 (one straight and one 90 degree end, unless specified in comments) $3.99 [Add $3.99]Does not work with our $15 Boss type power supplies, has 2 male ends for use with multi-outlet supplies like Voodoo Labs, etc

 Extra 36" power Cable for PP2 with one 90 degree end $4.99 [Add $4.99]Does not work with our $15 Boss style power supplies, has 2 male ends for use with Voodoo Labs etc
Optional power supplies

Add a Power Supply: 		US 120V 9vDC $15 [Add $15.00]- This is a normal 9V Boss type external power supply/adaptor for USA use with 120V AC wall power.

Add a Power Supply: 		Euro 240V $15 [Add $15.00]- this is an external power supply/adaptor for use with 220/240V AC to make 9Vdc for the pedal.

Add a Power Supply: 		UK 240V $15 [Add $15.00]- this is an external power supply/adapter for use with UK (3 prong) 220/240V AC to make 9Vdc for the pedal.

 
Description Extended Information
 
Analog Man carries the Black Cat D&S Pedal, based on the old Maxon D&S or OD-801
Features
Like the Bee Buzz, the Black Cat D&S began as a request from our Japanese distributor, who asked us to make a custom replica of the Ibanez/Maxon OD-801. The design first appeared in 1974 as the Maxon D&S, and the circuit was similar to the Version 2 (Rams Head) Big Muff. But the tone stack was quite a bit different than what has been used in any version of the Big Muff. In our opinion it�s much more versatile, and usable throughout the entire range of the control.

On a traditional Big Muff type pedal, the tone rolloff gets very muddy, resulting in a loss of definition and mushy sound. Maxon redesigned the tone circuitry to dump some resistance to ground, allowing much better definition in the low end. This gave the D&S a much more versatile tone control with a wider variety of sounds.

When we examined the circuit, we found that there really wasn't very much that we could improve upon for our version of the D&S. So we decided to leave it as it was and go for a faithful recreation. Even our choice of components was essentially the same as the early Maxon version � metal film resistors, stacked metal film caps, Nichicon electrolytic capacitors; we even sourced the original Toshiba 2SC1815-BL transistors that Maxon used. Just like the original on which it was based, the Black Cat D&S is a great sounding Muff-style fuzz pedal with a highly versatile wide range of tones.

Features:
� Modern replica of the original 1974 Maxon design
� Cool Black glass epoxy PCB with yellow silkscreen
� Metal film resistors and audio grade capacitors
� 3PDT true-bypass switch and Switchcraft jacks
� Uses 2.1mm Boss style power jack, or internal 9V battery
� Hand-wired, Boutique quality, Made in USA

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Other Effects Manufacturers A-L > Black Cat
Other Effects Manufacturers A-L
Other Effects Manufacturers A-L > Black Cat > Black Cat D&S


RMC4 Picture Wah - Wah Pedal by Geoffrey Teese $235.00
Electro-Harmonix Ravish Sitar Pedal $277.40
Electro-Harmonix East River Drive $81.60
Electro-Harmonix B9 Organ Machine pedal $259.50