Cry Baby� Rack Module Info

The Dunlop Custom Shop Rack Wah gives more control over your wah tone than any wah pedal in the world. The 6-position switch lets you select the sweep frequency range, and the variable Q control determines the wah's bandpass shape. The adjustable boost (up to +10dB) makes the Rack Wah even more flexible. You can connect up to six pedals and place them anywhere onstage. The two outputs give you an astounding amount of routing options for unprecedented versatility.

Controls:

• 6-position switch selects frequency center of effect
• 6-band graphic EQ allows tonal fine-tuning
• Six controller inputs for multiple remote access (requires DCR-1FC foot controller)
• Effect switching is handled with a hard wire bypass relay that complete
• removes all the input circuitry from the signal when the effect is bypassed or turned off.
• Two continuous outputs for versatility: Through and wet/dry (hardwire bypassed).
• Volume control incorporated pre-amp boost with up to +10dB additional gain.
• A remote input that will switch the rack into bypass mode with a simple switch closure.

The Crybaby DCR-2SR comes equipped with an additional loop for remote volume
control. This is preferable to merely running a volume pedal between your guitar and
amp because the pedal that controls the DCR-2SR volume function, is only a voltage
controller.

Power: Comes with USA 120V Dunlop ECB007 24 volt 200ma AC Adapter.